Cable guide

Read a cable
like an engineer.

What the letters on a cable mean, which IS standard covers what, and how to read a size before you order. See where each cable runs, from substation to switch, on the home page.

Code decoder

What the
letters mean

Indian LT cables are named by their construction, read from the conductor outwards. Type a code, or pick one below.

    Indian Standards

    Which IS
    covers what

    Department approvals and BIS licences name the standard. Check that the standard on the drum matches the one in your tender.

    Reading a size

    Cores ×
    area

    A size gives the number of cores, then the conductor area of each in square millimetres.

    4C × 16Four cores, each 16 sq mm. Three phases and a full-size neutral.
    3.5C × 95Three 95 sq mm phase cores and a smaller neutral, 50 sq mm in Paragon’s range. Written 95/50 in size tables.
    1C × 400A single 400 sq mm core. Used in sets of three or four for heavy feeders.
    12C × 2.5Twelve copper cores of 2.5 sq mm. A control cable for panels and motors.

    Before you order

    Five checks

    What an engineer looks for when material reaches site.

    1. Make on the listThe brand is on the department’s approved list for that work, and the approval is in force.
    2. Standard matchesThe IS number printed on the cable is the one named in the tender.
    3. BIS licence validThe CM/L number on the drum belongs to that maker and is still in force.
    4. Size and code rightCores, area, conductor metal, insulation and armour match the schedule.
    5. Test certificate with itEach consignment arrives with the maker’s test certificate for that lot.

    Know the code?
    Send the schedule.

    Add products to your enquiry with sizes and quantities, and copy it to WhatsApp or email.

    Browse products